Summary of Contents for Diamond Audio Technology HP650
Page 1
6.5” COMPONENT SYSTEM INSTALLATION MANUAL HP650...
Page 2
SPECIAL THANKS Dear Valued Customer, All of us at Diamond Audio would like to thank you for your purchase of a HEX Pro speaker system. ™ Pro component systems and subwoofers are the very best speakers available for use in the ™...
Page 3
TDX™ TECHNOLOGY Thermal-Dyne eXtreme is a fundamentally different solution. The concept is simple, eliminate the ™ detrimental effects of heat in a loudspeaker system. The solution however, is quite complex. Our engineers decided to start with a fresh sheet of paper and build a new line of products that addressed the thermal problems and shortcomings of conventional designs while significantly raising the existing level of performance.
Page 5
6.5” COMPONENT SPEAKERS Product Owners Manual MOUNTING MOUNTING Mid-Bass Mounting The illustration above shows the parts included and correct mounting assembly of the HEX ™ component mid-bass drivers. Be sure to check the available mounting depth before installation begins. Use of the foam gasket is recommended to ensure a proper seal between the speaker and MOUNTING mounting surface.
Page 6
CROSSOVERS CROSSOVERS Each HEX Pro component system comes with a pair of programmable crossovers. These crossovers CROSSOVERS ™ Each HEX Pro component set comes with a pair of programmable crossovers. These crossovers ™ use a combination of 12 and 24 dB/oct slopes to optimize the output of the tweeter and mid-bass use a combination of 12 and 24 dB/oct slopes to optimize the output of the tweeter and mid-bass Each HEX Pro component set comes with a pair of programmable crossovers.
Page 7
Fs (Hz) 12.5 Vas (L) THIELE/SMALL PARAMETERS Re (ohm) Xmax (mm) Impedance (ohm) 200/400 75/150 Power (watts) NOM/MAX Parameter (unit) HP650M HP650T Sensitivity - 2.83V@1M (dB) PHYSICAL DIMENSIONS 0.62 Fs (Hz) HP650M HP650T Model (inches) Vas (L) 10.0 6.5” / 166mm 2.6”...
LIMITED SPEAKER WARRANTY STATEMENT Diamond Audio Technologies, LLC (DAT) warrants this product to be free from defects in material and workmanship for a period of one (1) year from the original date of purchase provided it was purchased from an authorized DAT retailer within the United States.
Need help?
Do you have a question about the HP650 and is the answer not in the manual?
Questions and answers