Table of Contents
Advertisement
PD5208 O/M.QXD
8/22/01
OPERATING INSTRUCTIONS (CONTINUED)
REPEAT PLAYBACK
1
2
2
1
To repeat a single track, press the
REPEAT button
REPEAT indicator will blink.
Press the SKIP/Search
button
to select the specific
track that you wish to repeat.
When the desired track number
appears in the display, press the
PLAY/PAUSE (❿ ) button
begin playback. The specific track
you selected will be repeated
continuously.
PROGRAMMED PLAYBACK
The CD player in this unit has a 32 track programmable memory that allows you to program up to 32 tracks
on any disc for playback in any desired order. You may program 32 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
Slide the FUNCTION switch to
the CD position; the POWER
indicator will light.
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
4:31 PM
Page 8
2
3
1
To repeat all of the tracks on a
once; the
disc continuously, press the
REPEAT button
or
REPEAT indicator will light solid.
Press the PLAY/PAUSE (❿ )
button
back of all tracks.
to
2
Open the CD Compartment Door
and insert your disc in the CD
player. Close the CD Compartment
Door. Wait for the CD player to read
the table of contents and display the
total number of tracks on the disc.
3
2
To cancel Repeat Playback,
press the REPEAT button
twice; the
the REPEAT indicator goes out.
You can also cancel Repeat
Playback by pressing the STOP
( ) button
to begin repeat play
3
Press the PROGRAM button. "1"
will appear and the PROGRAM
indicator will blink.
8
2
1
until
.
Advertisement
Table of Contents
