Programmed Playback - Emerson PD5198 Owner's Manual

Programmed playback enables tracks on a disc to be played in any desired order. Up to 20
tracks can be programmed.
NOTE : Programming can only be done when the player is in Stop mode.
1.) Press the PROGRAM button. "PROGRAM" indicator flashes in the display.
PROGRAM
2.) Press the FWD or
Example: Track 7.
REV.
3.) Press PROGRAM button again to memorize the track.
4.) Repeat steps 2 and 3 until all desired tracks are programmed.
5.) Press the PLAY/PAUSE
"PROGRAM " indicator is flashing in the CD display.
6.) Press STOP button to stop programmed playback. The CD playback stops but the
program remains in the memory.
7.) Press PROGRAM and PLAY/PAUSE
8.) To clear the program memory, open the CD door, change to Radio function or switch
the power ' OFF' .
PD5198_032105.p65

PROGRAMMED PLAYBACK

REV button to select the desired track number. .
SKIP
FWD.
SEARCH
button to start playback.
buttons to resume programmed playback.
12
12
P R O G R A M
P R O G R A M
PLAY
P R O G R A M
21/3/2005, 16:00