LABEL
Key Format
Select Hex to enter the WEP keys as hexadecimal characters.
Select ASCII to enter WEP keys as ASCII characters.
Click OK to save the changes and close the screen.
OK
Cancel
Click Cancel to leave this screen without saving.
2.4.2 802.1x Configuration
In the Privacy screen, select WEP, CCX or WPA in the Privacy Mode field, set authentication method to
802.1X and click Configure to display the 802.1X Configuration screen as shown next.
The following table describes the labels in this screen.
Using the ZyAIR Utility
Table 2-6 WEP Configuration
Figure 2-15 802.1X Configuration
ZyAIR G-160 User's Guide
DESCRIPTION
2-23