McAfee VCLCDE-AA-DA - VirusScan Command Line Scanner Standard Product Manual page 39

®
VirusScan Command Line 5.20.0 Product Guide
9 If necessary, repeat Step 7
infection are removed.
10 If you cannot remove all effects of the original infection, refer to the Virus
Information Library for more information about manually removing an infection. For
any further assistance, refer to the AVERT Home Page. See the addresses in
Contact information on page
If the infections were removed:
Shut down your computer and remove the CD. Reconnect to the network, and
begin the installation procedure described on
To find and remove the possible source of infection, scan your diskettes
immediately after installation. For information, see
If infections were not removed:
If the scanner cannot remove an infection, you see one of the following messages:
Virus could not be removed.
There is no remover currently available for the virus.
In this case, refer to the Virus Information Library. See
page 9 for more information about manually removing an infection.
If the virus still cannot be removed, refer to the AVERT Home Page for information
about manually removing infections. See
and Step 8 to ensure that all effects of the original
9.
page 10.
Scanning diskettes on page
Contact information on
Contact information on page
39
Removing Infections
17.
9.
4