Display - Pioneer Elite VSX-43 Operating Instructions Manual

1
1
15
ECO
Switches between ECO Mode 1/ECO Mode 2. When ECO
Mode is turned ON, the display will go dark
16
iPod iPhone iPad DIRECT CONTROL
Change the receiver's input to the iPod and enable iPod
operations on the iPod (page 28).
17
iPod/iPhone/iPad terminals
Use to connect your Apple iPod/iPhone/iPad or USB mass
storage device as an audio source (page
18
HDMI input/MHL connector
Use for connection to a compatible HDMI device (Video
camera, etc.) (page 22). An MHL-compatible mobile device
can also be connected here using a MHL cable (sold
separately) (page 22).

Display

19
PHASE
Lights when the Phase Control is switched on
20
AUTO
Lights when the Auto Surround feature is switched on
(page 34).
21
Tuner indicators
ST – Lights when a stereo FM broadcast is being received
in auto stereo mode (page 32).
TUNE – Lights when a normal broadcast channel.
PRESET – Shows when a preset radio station is registered
or called.
MEM – Blinks when a radio station is registered.
kHz/MHz – Lights when the character display is showing
the currently received AM/FM broadcast frequency.
22
ZONE
Lights when the MULTI-ZONE feature is active
23
Speaker indicators
Shows if the speaker system is on or not
24
Sleep timer indicator
Lights when the receiver is in sleep mode
25
PRESET information or input signal indicator
Shows the preset number of the tuner or the input signal type,
etc.
26
Character display
Displays various system information.
(page 35).
27
DTS indicators
DTS – Lights when a source with DTS encoded audio
signals is detected.
HD – Lights when a source with DTS-EXPRESS or DTS-HD
encoded audio signals is detected.
ES – Lights to indicate DTS-ES decoding.
21).
96/24 – Lights when a source with DTS 96/24 encoded
audio signals is detected.
NEO:6 – When one of the NEO:6 modes of the receiver is
on, this lights to indicate NEO:6 processing
28
Dolby Digital indicators
2 D – Lights when a Dolby Digital encoded signal is
detected.
2 D+ – Lights when a source with Dolby Digital Plus
encoded audio signals is detected.
(page 36).
2HD – Lights when a source with Dolby TrueHD encoded
audio signals is detected.
EX – Lights to indicate Dolby Digital EX decoding.
2PLII(x) – Lights to indicate 2 Pro Logic II decoding.
Light will go off during 2 Pro Logic IIz decoding (see
Listening in surround sound on page 34
2PLII – Lights to indicate 2 Pro Logic II decoding. (see
Listening in surround sound on page 34
29
ADV.S.
Lights when one of the Advanced Surround modes has been
selected (see Using the Advanced surround on page 35
more on this).
30
SIGNAL SELECT indicators
DIGITAL – Lights when a digital audio signal is selected.
(page 54).
Blinks when a digital audio signal is selected and selected
audio input is not provided.
(page 15).
HDMI – Lights when an HDMI signal is selected. Blinks
when an HDMI signal is selected and selected HDMI input
is not provided.
(page 9).
31
Up Mix indicator
Lights when the Up Mix function is set to ON
32
DIR.
Lights when the DIRECT or PURE DIRECT mode is switched
on (page
(page 34).
for more on this).
for more on this).
for
(page 36).
8
Controls and displays
35).
4
7
62