Table of Contents
Advertisement
4
4
Tip
•
Change the receiver's input to the iPod in one action by
pressing
iPod iPhone iPad DIRECT CONTROL
front panel to enable iPod operations on the iPod.
2
Press
iPod CTRL
again to switch back to the receiver
controls when you're done.
Tip
•
Change the receiver's input to the iPod in one action by
pressing
iPod iPhone iPad DIRECT CONTROL
front panel to enable iPod operations on the iPod.
Playing a USB device
It is possible to play files using the USB interface on the front
of this receiver.
Important
•
Pioneer cannot guarantee compatibility (operation and/or
bus power) with all USB mass storage devices and
assumes no responsibility for any loss of data that may
occur when connected to this receiver.
•
About one minute is required between turning the power
on and completion of startup.
Note
•
Compatible USB devices include external magnetic hard
drives, portable flash memory (particularly keydrives) and
digital audio players (MP3 players) of format FAT16/32.
•
Copyrighted audio files cannot be played back on this
receiver.
•
With large amounts of data, it may take longer for the
receiver to read the contents of a USB device.
•
If the file selected cannot be played back, this receiver
automatically skips to the next file playable.
•
When the file currently being played back has no title
assigned to it, the file name is displayed in the OSD instead;
when neither the album name nor the artist name is
present, the row is displayed as a blank space.
•
Note that non-roman characters in the playlist are
displayed as '#'.
•
Make sure the receiver is in standby when disconnecting
the USB device.
1
Switch on the receiver and your TV.
See
Connecting a USB device on page
on the
2
Switch the TV input so that it connects to the receiver.
•
Switch the TV input to the input that connects this
receiver to the TV through the corresponding HDMI
cable.
3
Press
iPod/USB
on the remote control to switch the
receiver to the iPod/USB input.
When the display shows the names of folders and files,
on the
you're ready to play from the USB device.
If a USB Error message lights in the display, try following
the points below:
•
Switch the receiver off, then on again.
•
Reconnect the USB device with the receiver switched
off.
•
Select another input source (like BD), then switch back
to iPod/USB.
•
Use a dedicated AC adapter (supplied with the device)
for USB power.
If this doesn't remedy the problem, it is likely your USB
device is incompatible.
Playing back audio files stored on a USB memory
device
The maximum number of levels that you can select in Step 1
(below) is 9.
•
Note that non-Roman characters in the playlist are
displayed as '#'.
1
/
Use
to select a folder, then press
that folder.
•
To return to the previous level any time, press RETURN.
2
Continue browsing until you arrive at what you want to
play, then press
to start playback.
Basic playback controls
This receiver's remote control buttons can be used for basic
playback of files stored on USB devices.
•
Press
to switch the remote control to the iPod/
iPod/USB
USB operation mode.
21.
Playing back photo files stored on a USB memory
device
1
2
ENTER
to browse
28
Basic playback
AUDIO
TOOLS
PARAMETER
MENU
TOP
MENU
ENTER
ENTER
1
2
4
5
HOME
MENU
PTY
BAND
7
8
iPod CTRL
RETURN
/
Use
to select a folder, then press
ENTER
that folder.
•
For high resolution files, some time may be required
for the photo to appear.
•
To return to the previous level any time, press RETURN.
Continue browsing until you arrive at what you want to
play, then press
to start playback.
The selected content is displayed in full screen and a
slideshow starts.
4
MUTE
7
3
DISP
DISP
6
CH
CH
62
9
CH
CH
SHIFT
to browse
- Quick Links:
- Resetting the Main Unit
Hide quick links:
Advertisement
Table of Contents
