Sony STR-K700 - Fm Stereo/fm-am Receiver Service Manual page 5

About the indicators on the display
1 2 3
;
DIGITAL
LFE SP
SW
SLEEP OPT COAX
L C R
SL S SR
qd
qf
Name Function
A SW
Lights up when audio signal is
output from the SUB WOOFER
jack.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C SP
Lights up when the receiver is
turned on. This indicator does
not light up if a headphone is
connected to the PHONES jack.
D ;DIGITAL
Lights up when Dolby Digital
signals are input.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to "ANALOG".
E ; PRO
"; PRO LOGIC" lights up
LOGIC (II) when the receiver applies Pro
Logic processing to 2 channel
signals in order to output the
center and surround channel
signals. "; PRO LOGIC II"
lights up when the Pro Logic II
Movie/Music decoder is
activated.
Note
Dolby Pro Logic and Dolby Pro
Logic II decoding do not
function for DTS format
signals.
F DTS
Lights up when DTS signals are
input.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
"ANALOG".
4 5 6
;
PRO LOGIC II DTS
qs qa
STEREO MONO
D.RANGE
0 9
Name Function
G MEMORY
Lights up when a memory
function, such as Name Input,
Preset Memory , etc., is activated.
H Preset
Lights up when using the
station receiver to tune in radio stations
indicators you have preset. For details on
presetting radio stations.
I Tuner
Lights up when using the
indicators receiver to tune in radio stations,
etc.
J D.RANGE
Lights up when dynamic range
compression is activated.
K COAX
Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the COAXIAL
jack, or when INPUT MODE is
set to "COAX IN" .
L OPT
Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the OPTICAL
jack, or when INPUT MODE is
set to "OPT IN".
M SLEEP
Lights up when the Sleep Timer
function is activated.
N Playback
The letters (L, C, R, etc.)
channel indicate the channels being
indicators played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
L Front Left
R Front Right
C Center (monaural)
SL
Surround Left
SR
Surround Right
S
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): Dolby Digital 3/2.1
Sound Field: A.F.D. AUTO
STR-K700
7
MEMORY
8
SW LFE
L C R
SL SR
5