QQ
3 7 63 1515 0
SERVICE MANUAL
Ver. 1.2 2007.07
• STR-K685 is the tuner and the amplifier
section in HT-DDW685.
This receiver incorporates Dolby* Digital and Pro Logic Surround and
the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks of
Dolby Laboratories.
** "DTS" and "DTS Digital Surround" are registered trademarks of DTS,
Inc.
TE
L 13942296513
Amplifier section
Models of area code SP, SP6, E51, MX, TH
1)
Power Output
Stereo mode (rated) (6 ohms 1 kHz, THD 1%)
2)
Surround mode
(reference)
(6 ohms 1 kHz, THD 10%)
2)
Surround mode
(reference)
(10 ohms 100 Hz, THD 10%)
Models of area code AR
1)3)
Power Output
Stereo mode (rated) (6 ohms 1 kHz, THD 1%)
www
.
Sony Corporation
9-887-654-03
Home Audio Division
2007G16-1
Published by Sony Techno Create Corporation
© 2007.07
http://www.xiaoyu163.com
Surround mode
(6 ohms 1 kHz, THD 10%)
70 W + 70 W
RMS output
FRONT:100 W
per channel
CENTER: 100 W
SURROUND: 100 W
Surround mode
per channel
(10 ohms 100 Hz, THD 10%)
SUB WOOFER: 60 W
per channel
1)
Measured under the following conditions:
Area code
SP, SP6, AR, TH
1)
70 W + 70 W
E51
3)
65 W + 65 W
MX
x
ao
y
i
http://www.xiaoyu163.com
STR-K685
8
SPECIFICATIONS
Q Q
3
6 7
1 3
2)
(reference)
RMS output
FRONT:
1)
100 W per channel
3)
90 W per channel
CENTER:
1)
100 W
3)
90 W
SURROUND:
1)
100 W per channel
3)
90 W per channel
2)
(reference)
SUB WOOFER:
1)
60 W per channel
3)
50 W per channel
Power requirements
230 V AC, 50 Hz
240 V AC, 50 Hz
127 V AC, 60 Hz
FM STEREO/FM-AM RECEIVER
u163
.
2 9
9 4
2 8
1 5
0 5
8
2 9
9 4
2)
Reference power output for front, center, surround
speakers and sub woofer. Depending on the sound
field settings and the source, there may be no
sound output.
3)
Measured under the following conditions:
Area code
Power requirements
AR
220 V AC, 50 Hz
Inputs
Analog
Sensitivity: 800 mV/
50 kohms
Digital (Coaxial) Impedance: 75 ohms
Tone
±6 dB, 1 dB step
Gain levels
Reproduction frequency range:
28 – 20,000 Hz
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
— Continued on next page —
m
co
9 9
E Model
2 8
9 9
Need help?
Do you have a question about the STR-K685 and is the answer not in the manual?
Questions and answers
How to cancel the protection mode after volume get higher it goes into protect
To disable protection mode on the Sony STR-K685 when the volume is high, follow these steps:
1. Lower the volume level to prevent triggering the protection mode again.
2. Check for any short circuits or issues with speaker connections, such as damaged wires or improperly connected speakers. Ensure all connections are secure and correct.
3. Make sure the speaker impedance matches the receiver's specifications (6 ohms).
4. If protection mode persists, reset the receiver:
- While pressing the MOVIE and DISPLAY buttons simultaneously, press the power ?/1 button to turn on the unit.
- The display will show "PROT. EVER" briefly, and the receiver will turn on.
If the issue continues, inspect the speakers and wiring for faults or consult a technician.
This answer is automatically generated