Smart Technologies AirLiner WS100 Installation And User Manual page 51

5. Select your mouse settings.
Setting
Double-Click Zone
Enable Mouse Assist
Enable Hover
Enable Touch and Hold
Enable Pop-up Messages
6. Click OK.
The SMART Board Settings dialog box closes.
7. Close the SMART Board software control panel.
99-00666-20 B0
Function
Double-Click Zone allows you to set a greater margin of
error when double-clicking. When you select a large
Double-Click Zone, you don't have to tap the tethered
pen twice in exactly the same place.
Mouse Assist makes it easier to move the pointer to
commonly used buttons and toolbars, such as
close buttons
Enable Hover allows you to move the pointer on your
display and engage the side switch without touching the
slate. See page 28 for more information.
Touch and Hold is another way to right-click. Press and
hold the tethered pen on the workspace to right-click.
Pop-up Messages appear in your Internet browser if
you select this option; otherwise, they are blocked.
This is not a mouse-specific setting.
NOTES
• If you clear this check box to prevent pop-up
message disruptions during a lesson or presentation,
it's a good idea to select it again when you're done,
because pop-up messages are often important and
helpful.
• You can also configure pop-up message settings in
your operating system software.
Customizing the Slate
and scroll bar buttons .
43