Using The Cordless Mouse - Smart Technologies AirLiner WS100 Installation And User Manual

Using the Cordless Mouse

The cordless mouse is battery-free. You can use it like a traditional mouse within the workspace,
instead of the tethered pen.
Right Mouse Button
The cordless mouse has three buttons. The left mouse button is set to left-click, the right mouse
button is set to right-click, and the wheel button is set to middle-click. In many programs, you can
rotate the wheel button to scroll up and down.
Because the cordless mouse works like a traditional mouse, you can customize its buttons in your
operating system software. You can also use the cordless mouse to write in digital ink on your
display, in place of the tethered pen.
TIP
CAUTION
To write with digital ink using the cordless mouse
NOTE: To work with digital ink, you must first install SMART Board software on your computer
(see page 18).
1. Press the tethered pen on a creative tool (e.g., a pen, highlighter or stamp) on the tool strip,
and then release it.
2. Place the tethered pen in its storage compartment, and then place the cordless mouse on the
workspace.
3. Position the pointer at the desired location of your display.
4. Press and hold the left mouse button, and then write or draw like you would with an ink pen.
99-00666-20 B0
In Microsoft® Office programs that support mouse devices with wheel buttons,
press and hold the CTRL key, and then rotate the wheel button to zoom in and out
of the current program window.
Do not leave the cordless mouse on the slate's workspace when you are not using
it, because it can interfere with pointer positioning.
Using the Slate and its Tools
Wheel Button
Left Mouse Button
33