Audio Streaming; Listening To A Bluetooth Device Via; This Unit; Operating A Bluetooth Device With - Sony XAV-63 Operating Instructions Manual

Audio streaming

Listening to a Bluetooth device via

this unit

If the other device supports A2DP (Advanced
Audio Distribution Profile), you can listen to the
playback sound via this unit.
1
Connect this unit and the Bluetooth
device (page 35).
2
Reduce the volume on this unit.
3
Touch "Source List," then "BT Audio."
The Bluetooth Audio display appears.
4
Operate the other Bluetooth device to
start playback.
5
Adjust the volume on this unit.

Operating a Bluetooth device with

this unit
If the other device supports AVRCP (Audio
Video Remote Control Profile), you can control
playback via this unit.
Operations can be performed in the same way as
disc playback (page 20), except for the
following:
Do this To
Touch "Play
open the Bluetooth setting
Menu" c "BT
menu (page 39).
Menu"
Touch –/+ in the
reduce the volume level
"Level" box differences between this
unit and the other Bluetooth
device. The level is
adjustable in single steps,
between –8 and +18.
Touch
connect to the last-
"Connect" connected device from this
unit.
Notes
• The available operation differs depending on the
Bluetooth device. Perform unavailable operations on
the Bluetooth device.
• Depending on the Bluetooth device, it may be
necessary to touch u twice to start/pause the
playback.
• During audio streaming, some indications such as
track name, etc., may not appear on this unit.

Bluetooth settings

The Bluetooth settings can be configured in "BT
Menu."
1
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch "BT Phone" in the top menu.
To select Bluetooth Audio, touch "Source
List," then "BT Audio."
2
Touch "BT Menu."
In the case of Bluetooth Audio, touch "Play
Menu," then "BT Menu."
The Bluetooth setting menu appears.
3
Touch the desired item in the list and
configure the setting.
The items in the Bluetooth setting menu are as
follows:
"Signal"* 1
Activates the Bluetooth signal: "ON," "OFF."
"Pairing"*
1
Turns the pairing mode on/off, and memorizes
the information between this unit and the
Bluetooth device.
"Auto Answer"* 1
Answers an incoming call automatically.
– "Short": to answer automatically after 3
seconds.
– "Long": to answer automatically after 10
seconds.
– "OFF": to not answer automatically.
"Ringtone"* 1 * 2
Uses the ringtone of this unit or the connected
cellular phone: "Default," "Cellular."
"EC/NC Mode" (Echo Canceller/Noise
Canceller Mode)
Reduces echo and noise during a call.
For normal use, set to "Mode 1."
If the outgoing sound quality is unsatisfactory,
set to "Mode 2."
"MIC Gain" (page 38)
Adjust the microphone volume for the other
party: "Low," "Middle," "High."
"Initialize"* 1
Initializes all Bluetooth related settings. Touch
"Yes" to confirm.
*1 Cannot be configured during a handsfree call.
*2 Depending on the cellular phone, this unit's
ringtone may be output even if set to "Cellular."
Note
For details on the setting of other Bluetooth devices,
refer to their respective manuals.
39