recording
TAKING PHOTO IMAGES
You can take photo images in Photo Record mode only. ➥page 22
•
You can take photo images with the PHOTO button.
•
1. Turn the memory camcorder on.
Connect a power source to the memory camcorder. ➥pages 14, 21
•
(A battery pack or an AC power adaptor)
Slide the POWER switch downward to turn on the power.
•
•
Set the Lens open/close switch to open (
2. Press the MODE button to set Photo Record mode (
Set the appropriate storage media. ➥page 39
•
(Built-in memory (8GB (SMX-F33(2)BP/LP/RP/SP only)/16GB (SMX-F34(0)BP/
LP/RP/SP only)) or memory card)
3. Check the subject on the LCD screen.
4. Press the PHOTO button.
Shutter sound is heard. Indicators on the screen disappear, and the photo
•
image is recorded.
While saving the photo image on the memory card, you cannot proceed with
•
the next recording.
5. When taking photo images is fi nished, turn the memory camcorder off.
The photo image is taken only in the 4:3 aspect ratio as shown in the illustration.
•
Audio will not be recorded with the photo image on the storage media.
•
If focusing is diffi cult, use the manual focus function. ➥page 63
•
Do not operate the POWER switch or remove the memory card while accessing the storage media.
•
Doing so may damage the storage media or the data on storage media.
Photo image fi les recorded by your memory camcorder conform to the "DCF (Design rule for Camera
•
File system)" universal standard established by the JEITA (Japan Electronics and Information Technology
Industries Association).
DCF is an integrated image-fi le format for digital cameras: Image fi les can be used on all digital devices
•
conforming to DCF.
•
The recorded photo image size is 800X600.
In Movie Record mode (
•
). ➥page 10
). ➥page 22
), pressing PHOTO button will switch to Photo Record mode (
99999
99999
).
English_48