Table of Contents
Advertisement
The video signal that is input will differ even in same display modes according to
the PC output.
When connected to the PC for the first time, the display position
may be offset or the dots may appear distorted. Before use, adjust the screen
display.
Pressing the DOWN button (V) will display the automatic setting menu.
automatic settings according to the menu.
If you wish to manually adjust each setting or adjust other settings, use the
functions. Make the adjustments with the buttons while looking at the OSD menu.
If a video signal is not input from the PC, the adjustment functions will not
l
operate.
side.
The brightness, display color, OSD position adjustments, and language setting
l
are common to all display modes.
All other settings are only valid for current mode and when the display mode is
changed, those settings must be redone for each mode.
Display modes that have close frequencies may be recognized as the same
mode.
of differences in the PC input signals.
this should happen.
Use manual settings for fine-tuning if
13
Make the
Advertisement
Table of Contents
