Connecting To A Stereo System (For Dvd); Connecting To An Amplifier Equipped With Digital Input Jacks Such As Md Deck Or Dat Deck (For Dvd) - Emerson EWC19T1 Owner's Manual

CONNECTING TO A STEREO SYSTEM (for DVD)

Stereo system
NOTES:
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for your, stereo system and any other components to be connected to the
TV/DVD/VHS.
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS SUCH AS MD DECK OR DAT DECK (for DVD)
Use an audio coaxial digital cable (commercially available) for the audio connections.
Connecting to an amplifier equipped with digital input jacks such as MD Deck or Dat Deck.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
NOTES:
•
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
•
Be sure to turn off the power to all components in the system before connecting another component.
•
Refer to the Owner's Manuals for the components to be connected to the TV/DVD/VHS.
•
Set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a TV/DVD/VHS using
incorrect settings may generate noise distortion, and may also damage the speakers.
•
When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and
you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
ANT.
To ANALOG AUDIO INPUT jacks
ANT.
To COAXIAL DIGITAL
AUDIO INPUT jack
- 14 -
1
L
AUDIO OUT
R
COAXIAL
To Right (red) and Left (white)
AUDIO OUT jacks
(only DVD AUDIO OUT)
[Fig. 6]
1
L
AUDIO OUT
R
COAXIAL
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)
[Fig. 7]
EN
1C29