Hitachi L46VN05U Instructions For Use Manual page 16

Viewing the Connections - Side Connectors
1. CI Slot is used for inserting a CI card. A CI card allows you
to view all the channels that you subscribe to. For more
information, see "Conditional Access" section.
2. Side USB input .
Note: Codec update cannot be performed.
3. Side HDMI Input is for connecting a device that has an HDMI
socket.
4. Headphone jack is used for connecting an external headphone
to the system. Connect to the HEADPHONE jack to listen to
the TV from headphones.
5. Video Input is used for connecting video signals of external
devices.Connect the video cable between the VIDEO IN
socket on the TV and the VIDEO OUT jack on your device.
6. Audio Inputs are used for connecting audio signals of external
devices. Connect the audio cable between the AUDIO INPUTS
on the TV and the AUDIO OUTPUT jacks on your device.
Note: If you connect a device to the TV via the VIDEO INPUT,
you should also connect your device with an audio cable to the
AUDIO INPUTS of the TV to enable audio.
7. S-Video Input is used for connecting an S-Video signal (e.g.
from a camcorder or VCR). For using S-VIDEO input; connect
the video cable between the S-VIDEO input on the TV and the S-Video output on your
device. Connect the audio cable between the AUDIO INPUTS (indicated with letter C in the
illustration) on the TV and the audio jacks on your device.
8. Standby switch is used for turning the TV on or off.
English - 11 -