Advertisement
PART IDENTIFICATION:
1. Ground stainless steel blades
2. Blade releasing switch
WARNING: THIS PRODUCT IS NOT INTENDED FOR
USE BY CHILDREN.
BEFORE FIRST USE:
Wash detached blades in hot, soapy water. Rinse, and then dry thoroughly. Handle
knife blades with care, as they are extremely sharp.
HOW TO ASSEMBLE AND USE:
CAUTION:
Be sure cord is not connected to power outlet when removing or
inserting blades and / or when knife is not in use. The blades are extremely sharp.
Always handle blades by dull edge (side opposite the cutting edge) or by the
protective sleeve.
1.
Always use both blades when operating the knife. If blades are separated, pick
up blades by the protective sleeve. Slide the rivet on one blade into the keyhole
slot of the other blade until they are locked together.
Keep the protective sleeve on the blades, carefully insert the free ends into the
2.
knife, and push into position until a click is heard. It will be found that pushing
the blades by the finger grips will facilitate fitting.
3. ON/OFF button
4. Handle
2
Advertisement
