Chapter 2 Installation; Introduction; Unpacking - Compaq 3Dlabs OXYGEN VX1 Installation Manual

2.1

Introduction

This chapter describes the installation of the 3Dlabs OXYGEN VX1 PCI
graphics controller module in a supported Compaq product. Topics included in
this chapter are:

Unpacking

Hardware installation
2.2 Unpacking
The graphics option hardware is packaged in a single carton that contains the following:
Description
3Dlabs OXYGEN VX1 Graphics Controller,
32MB PCI
3Dlabs OXYGEN VX1 PCI Graphics
Controller Installation Guide (this manual)
Chapter 2
Installation
Part Number
SN-PBXGF-AB
EK-VX1GC-IG
Installation 2-1