Table of Contents
Advertisement
Focus adjustment
1
Touch
r
/
s
to adjust the focus.
r:
To focus on a close subject
s:
To focus on a faraway subject
≥ It will return to default setting when [Reset] is touched.
≥ Focus Assist will operate when [FA] is touched, and
the part that is focused will be displayed in red.
Touch [FA] again to cancel the operation.
≥ Image of the left and right lenses will switch every
time the lens switch icon is touched.
≥ Adjusting the image from the left lens is not possible.
2
Touch [ENTER].
Iris adjustment
1
Touch
r
/
s
to adjust the brightness.
r:
Brighten the image
s:
Darken the image
≥ It will return to default setting when [Reset] is touched.
≥ Image of the left and right lenses will switch every
time the lens switch icon is touched.
≥ Adjusting the image from the left lens is not possible.
2
Touch [ENTER].
Utilizing the USER button
It is convenient to use following functions of the
USER button when 3D recording or adjusting the convergence point.
≥ Please refer to page 67 for details about setting the USER buttons.
USER button function
R-image (l 72)
3D Display (l 72)
Convergence Reset (l 73)
3D Macro (l 73)
44
VQT3U98
Image displayed on the screen is switched to the image
from the right lens when the 3D display is turned off in
the 3D Recording Mode.
Switches the display method of the 3D image.
The display of the convergence point goes to
the convergence point is automatically set to prevent 3D
video that tires or discomforts the viewer.
3D image can be recorded as close as approximately
45 cm (1.5 feet) to the subject when the zoom
magnification is set to 1k.
(When displaying image from the
right lens)
A Lens switch icon
(When displaying image from the
right lens)
B Lens switch icon
Effect
, and
Advertisement
Table of Contents
