Emerson Research CKT9100 Owner's Manual page 35

4.) Remove the original battery from the holder and insert the new battery into the
holder the same way, observing the positive (+) direction. Slide the holder with
the new battery back into the slot in the cabinet.
Turn the holder up side down
5.) Replace the screw that secures the battery holder in the cabinet.
6.) Turn the radio right side up and confirm that the BATTERY LOW indicator is
' Off' .
7.) Save these instructions. You' ll have to do this again five to eight years from
now!
CKT9100_090606.p65
34
34
Battery holder slot
6/9/2006, 11:00