Manual Time Adjustments - Emerson Research CKS2862 Owner's Manual

Manual Time Adjustments

Some people like to set their clocks 5 to 10 minutes fast to make sure that they will
®
always be on time. Even though the SmartSet sets the time by itself, you still have
the option of adjusting the time manually if you wish.
To manually adjust the time display depress and hold the TIME button, and press
either the SET (Up) or SET (Down) buttons to adjust the time display ahead or
back as desired.
Each press of the SET (Up) or SET (Down) buttons will change the display by
one minute.
If you hold the SET (Up) or SET (Down) buttons the display will continue to
change. The display will change slowly at first, one minute at a time.
But if you continue holding the SET (Up) or SET (Down) buttons the display
will change rapidly.
Note:If you manually adjust the time, your new setting is entered into the
®
SmartSet memory. If the power is interrupted, the display will return to your
new setting, not the original setting, when the power is restored.
10
CKS2862_061207.p65 10 12/6/2007, 15:54