Advertisement
Back cover
Front cover
B
Installation and Operation
C
o r d l e s s H a n d s e t
3
• Remove battery from box
7
• Charge without interruption
1
• Remove cover from back of
4
• Plug battery into slot
2
• Be sure clip is facing up
• Tuck battery and exposed
5
• Replace cover firmly
• Insert handset into charging
slot
• LED on base unit turns red
U
s e r G u i d e
• Standard nickel-cadmium
Maintenance
2
Back cover folds
over Panel one
Panel one
• Locate contact point on
a t t e r y
handset and base unit
• Clean with pencil eraser or
contact cleaner
• Repeat monthly to maintain
a good charge
for 17.5 hours
Note: After continuous charg-
ing, battery can fail to
charge/
handset
discharge due to memory
effect. This is normal. To cor-
rect, operate handset until
low battery tone sounds, auto
shut-off occurs and the battery
fully discharges. Charge bat-
tery without interruption for
wires inside
17.5 hours. If battery still does
not charge, replace it.
during and after charging is
complete
battery provides 4 hours talk
time, 40 hours standby
C
o r d l e s s H a n d s e t
U
s e r G u i d e
1
Panel one
folds in
• Remove cover from back of
• Locate contact point on
handset
handset and base unit
• Plug battery into slot
Installation and Operation
• Clean with pencil eraser or
contact cleaner
• Be sure clip is facing up
• Remove battery from box
• Repeat monthly to maintain
• Tuck battery and exposed
• Charge without interruption
a good charge
wires inside
for 17.5 hours
Note: After continuous charg-
• Replace cover firmly
• Remove cover from back of
ing, battery can fail to
handset
charge/
• Insert handset into charging
discharge due to memory
slot
• Plug battery into slot
effect. This is normal. To cor-
rect, operate handset until
• LED on base unit turns red
• Be sure clip is facing up
low battery tone sounds, auto
shut-off occurs and the battery
during and after charging is
fully discharges. Charge bat-
complete
• Tuck battery and exposed
tery without interruption for
wires inside
17.5 hours. If battery still does
• Standard nickel-cadmium
not charge, replace it.
battery provides 4 hours talk
• Replace cover firmly
time, 40 hours standby
• Insert handset into charging
slot
Maintenance
• LED on base unit turns red
Installation
• Locate contact point on
during and after charging is
and
handset and base unit
Operation
complete
• Clean with pencil eraser or
• Standard nickel-cadmium
• Remove battery
contact cleaner
from box
battery provides 4 hours talk
time, 40 hours standby
• Repeat monthly to maintain
• Charge without interrup-
a good charge
tion
Maintenance
for 17.5 hours
Note: After continuous charg-
Inside
Advertisement
