Radar Alert Settings; Pop Alert - Cobra 14 BAND XRS 9550G Operating Instructions Manual

14 band high-performance digital radar/laser detector with xtreme range superheterodyne technology and red light / speed camera gps locator
Table of Contents

Advertisement

Settings
Your Detector
Intro
Operation
Customer
Warranty

Radar Alert Settings

Assistance
XKKaKu
To Turn X Band On and Off
Secondary Icons
While no signal
Tone
is being detected,
X On = Two beeps
press and hold both
the Mark/Dim and
Mute buttons for
Notice
X Off = One beep
four seconds.
To Turn K Band On and Off
Tone
While no signal
is being detected,
K On = Two beeps
press and hold both
the Mute and City
buttons for
K Off = One beep
four seconds.
To Turn Ka Band On and Off
With unit power Off,
Tone
press and hold the
Ka On = Two beeps Ka Band On
Mute button. Then
turn the power On
and continue to hold
Ka Off = One beep
the Mute button for
two seconds.
To Turn Ku Band On and Off
While no signal
Tone
is being detected,
Ku On = Two beeps Ku Band On
press and hold the
City/Hwy button for
four seconds.
Ku Off = One beep
16
English
Voice
Visual Display
X Band On
X On blinks in the
display
X Band Off
X Off blinks in the
display
Voice
Visual Display
K Band On
K On blinks in the
display
K Band Off
K Off blinks in the
display
Voice
Visual Display
Ka On blinks in the
display
Ka Band Off
Ka Off blinks in the
display
Voice
Visual Display
Ku On blinks in the
display
Ku Band Off
Ku Off blinks in the
display
Your Detector
Intro
Operation
Customer
Warranty

Pop Alert

Assistance
The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature of a
K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses a single,
short-time pulse to measure the target vehicle's speed.
Secondary Icons
The Pop mode receiver senses Pop signals beyond the effective range of Pop radar
guns. As the Pop mode receiver is so sensitive, you should limit the use
of Pop Detect mode to highway and rural driving.
Pop Alert will alert you to Pop radar signals. During the alert, the unit continues
to detect other signals. The factory setting is Pop Detect Off.
Notice
To Turn Pop Alert On and Off
Tone
While no signal
is being detected,
Pop On =
press and hold both
Two beeps
the Mark/Dim and
City/Hwy buttons for
Pop Off =
four seconds.
One beep
Voice
Visual Display
Pop Alert On
Pop Alert On blinks in
the display
Pop Alert Off
Pop Alert Off blinks in
the display
Nothing Comes Close to a Cobra
®
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xrs 9550g

Table of Contents