Programmed Playback - Emerson NR40 Owner's Manual

Programmed Playback

This feature allows you to program up to 20 tracks on a disc for playback in any
desired order.
Note: You can program tracks while the disc is stopped or while the disc is
playing.
1.) Press the PROGRAM button to enter the Program Mode.
The Program number briefly shows ' 0 1' , then ' 0 0' and the
PROGRAM indicator flash.
2.) Press the F.SKIP or B.SKIP buttons to select the first track
number you wish to enter in the program memory.
Example: Track Number ' 0 8' .
3.) When the desired track number appears on the display, press
the PROGRAM button again to enter that track in memory.
The Program number briefly shows ' 0 2' , then ' 0 0' flashes.
4.) Repeat Steps 2-3, selecting a different track number each time until you have
entered up to 20 tracks in the program memory.
Note: You may program the same track number to play multiple times in
the program sequence if desired.
5.) Press the PLAY/PAUSE button to begin Programmed
Playback. The PROGRAM indicator stops flashing and
remains ' On' .
Playback will begin with the first track you programmed and will continue until
the last programmed track has played.
NR40_110804.p65
14
14
PROGRAM
PROGRAM
PROGRAM
PROGRAM
8/11/2004, 10:05