Listening To The Radio - Emerson NR40 Owner's Manual

OPERATING INSTRUCTIONS

Listening To The Radio

1.) To turn the system ' on' , rotate the ON/OFF-VOLUME control clockwise until a
' click' is heard, and set the Volume to a low level. The Tuning Dial light comes
' On' .
2.) Set the Function selector (AM/FM/CD) to the desired band, AM or FM .
3.) Rotate the TUNING control to tune to the desired radio station. If you tune to an
FM Stereo station, the FM ST. indicator will come ' on' .
4.) Adjust the ON/OFF-VOLUME control as desired.
5.) When you are finished listening turn the ON/OFF-VOLUME control counter
clockwise until a ' click' is heard. The Tuning Dial light goes ' Off' .
Antenna Information
AM – The AM bar antenna is inside the cabinet. If AM reception is weak, change
the position of cabinet until the internal antenna picks up the strongest signal.
FM – The FM antenna is built in the AC power cord. If FM reception is weak try
varying the position and direction of the power cord until you find the strongest
signal.
NR40_110804.p65
10
10 8/11/2004, 10:05