Clarity XLC 3.5HS User Manual page 12

XLC3.5HS/B
Difficulty in placing or receiving calls:
• Move closer to the base and try again.
• Make sure you have selected the correct dialing mode, tone
• Make sure the handset battery is fully charged.
Screen displays "Battery Low":
• Handset batteries are low on charge; return the handset to the
base to recharge the batteries.
TALK button is blinking green (fast pace):
• The base is trying to locate the handset; press TALK to
Your handset screen is displaying "Searching...":
• Move closer to the base.
• To register the XLC3.5HS/HSB, place the XLC3.5HS/HSB
• Verify that the AC adapter is plugged into the base and into the
• The handset is out of range or the power to the base is
• Place the handset into the base until the screen returns to
• Handset may need to be re-registered to the base manually.
12
TROUBLESHOOTING
or pulse.
end the FIND paging process and return the handset to the
base.
handset into the main unit until the screen displays: Handset
Registered. It will take approximately 5-10 seconds for the
handset to register to the base.
wall outlet.
unplugged.
standby mode. It will take approximately 5-10 seconds for the
handset to register to the base.
Follow the instructions on page 8.