Thank you for purchasing the Clarion ARX7570z. 11. ESPECIFICACIONES Please read this owner’s manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Sintonizador de FM Audio Check the contents of the enclosed warranty card and keep it carefully with this manual.
• Periodically play a cleaning cassette in the tion between tracks is shorter than 4 seconds Capability to Read CD TEXT Data from Clarion Compatible CD Changer player to clean the head. • Cassette tapes with noise or the like recorded Z-Enhancer with 3 Adjustment Modes •...
3. CONTROLS / LES COMMANDES / CONTROLES 4. NOMENCLATURE 5. DCP Note: The control panel can be detached to prevent theft. When detaching the control panel, store it in the • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.
Functions of Remote Control Unit Buttons CD changer Mode Radio Tape Button MD changer ) FUNC Turns power on and off. When pressed and held for 1 second: Turns power off. Switches among radio, tape, CD changer, MD changer and TV. ¡...
7. OPERATIONS Note: Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “3. CONTROLS” on page 5 (unfold). Radio mode Tape mode CD changer CAUTION mode MD changer mode TV mode Radio mode... Be sure to lower the volume before switch- ing off the unit power or the ignition key.
Basic Operations Setting the Z-enhancer Adjusting the bass 1. Press A-M button # and select “BASS”. This unit comes with 3 types of sound tone effects stored in memory. Select the one you prefer. 2. Turning the Rotary knob % clockwise empha- The factory default setting is “Z-EHCR OFF”.
Radio Operations Basic Operations Adjusting the Z-enhancer FM reception 1. Press Z-EHCR button 8 and select the Z- ® For enhanced FM performance the enhancer mode (1 to 3) to adjust. tuner includes signal actuated stereo control, En- 2. Press A-M button # and select “Z-EHCR”. hanced Multi AGC, Impulse noise reduction circuits and Multipath noise reduction circuits.
Radio Operations Manual tuning Auto store There are 2 ways available: Quick tuning and step Auto store is a function for storing up to 6 sta- tuning. tions that are automatically tuned in sequentially. When you are in the step tuning mode, the fre- If 6 stations cannot be received, a previously quency changes one step at a time.
Tape Operations Loading a tape Ejecting a tape 1. Press OPEN button 1 to access the cassette 1. Press OPEN button 1 to access the cassette Eject button & behind the FLIP DOWN tape insertion slot behind the FLIP DOWN PANEL.
Page 11
Tape Operations APC (Auto Program Control) function 2. To cancel the intro tape scan, press SCN but- ton 5 again. “SCN” goes off from the display The APC function allows the tape to skip forward and the current track continues to play. to the beginning of the next track or rewind to When the end of the tape is reached during the the start of the current track.
Other Handy Functions Setting the clock Entering titles 1. Press and hold ADJ button 4 for 1 second or Titles up to 10 characters long can be stored in longer to switch to the adjustment selection memory and displayed for radio stations and display.
Adjusting the display contrast This function is not compatible with all cellular tele- phones. Contact your local authorized Clarion You can adjust the display contrast according to dealer for information on proper installation and the angle of installation of the unit.
8. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions Selecting a CD Each of the Direct button 9 corresponds to a When an optional CD changer is connected through the CeNET cable, this unit controls all disc loaded into the magazine. the CD changer functions.
CD Changer Operations Top function Disc repeat play The top function plays from the first track (track After all the tracks on the current disc have been No. 1) of the disc. played, the disc repeat play automatically replays the current disc over from the first track. This func- When playing a disc 1 to 6 tion continues automatically until it is canceled.
MD Changer Operations MD changer functions 2. Each time you press the right side of SEARCH button $, the track advances ahead to the When an optional MD changer is connected beginning of the next track. through the CeNET cable, this unit controls all Track-down the MD changer functions.
TV Operations MD Changer Operations Repeat play TV tuner functions The repeat play continuously plays the current When an optional TV tuner is connected through track. This function continues automatically until the CeNET cable, this unit controls all TV tuner it is canceled.
Page 18
TV Operations 1. Press BND button @ and select the desired Manual tuning TV band (TV1 or TV2). There are 2 ways available: Quick tuning and step 2. Press and hold AS button 5 for 2 seconds or tuning. longer. The stations with good reception are When you are in the step tuning mode, the fre- automatically stored to the Preset buttons 9.
Page 19
9. TROUBLESHOOTING Problem Cause Measure Power does not Fuse is blown. Replace with a fuse of the same amperage. If the turn on. fuse blows again, consult your store of purchase. (No sound is produced.) Incorrect wiring. Consult your store of purchase. No sound output Power antenna lead is 1.
Page 20
10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Cause Error Display Measure ERROR 1 Tape cannot be played due to defective Eject the tape then replace it with a new tape such as cut tape.
11. SPECIFICATIONS FM Tuner Audio Frequency Range: Maximum Power Output: 87.9 MHz to 107.9 MHz 160 W (40 W 4 ch) (EIAJ) Usable Sensitivity: Continuous Average Power Output: 11 dBf 14 W 4, into 4 , 20 Hz to 20 kHz, 1%THD 50dB Quieting Sensitivity: Bass Control Action (30 Hz): 17 dBf...