Clarion ProAudio DRX7675z Owner's Manual page 14

Other Handy Functions
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for radio stations and
CDs. The numbers of titles that can be entered
for each mode are as follows.
Mode
Radio mode
CD mode
TV mode
CD changer mode
CDC655z connected
CDC655Tz connected
CDC1255z connected
1. Press FNC button 3 to select the mode you want
to enter a title. (radio, CD, CD changer or TV)
Titles cannot be entered for MDs with this unit.
2. Select and play a CD or a CD in the CD changer
or tune to an appropriate TV or radio station.
3. Press DISP button ! and display the subtitle.
4. Press TITLE button 4. "TITL" appears in the
display and the cursor position flashes.
5. Press the right or left side of SEARCH button
% to move the cursor.
6. Press DISP button ! to select a character.
Each time you press DISP button !, the
character changes in the following order:
Capital letters Small letters
Symbols Capital letters...
7. Turn the Rotary knob & to select the desired
character. Turning the Rotar y knob &
clockwise moves the cursor to the next
character; turning it counterclockwise moves
the cursor to the previous character.
8. Repeat steps 5 to 7 to enter up to 10
characters for the title.
9. Press and hold ENT button 2 for 2 seconds
or longer to store the title into memory and
cancel title input mode.
Clearing titles
1. Play a CD or a CD in a CD changer or tune a
radio station or TV station that you want to
clear the title for.
2. Press DISP button ! and display the sub-
title.
3. Press TITLE button 4. "TITL" appears in the
display and the display switches to the title
input display.
16
DRX7675z
Number of titles
30 titles
50 titles
15 titles
Number of titles
60 titles
100 titles
50 titles
Numbers
4. Press BND button #.
5. Press and hold ENT button 2 for 2 seconds
or longer to clear the title and cancel the title
input mode.
Adjusting the display contrast
You can adjust the display contrast according to
the angle of installation of the unit.
The factory default setting is "6". (Adjustment level:
1 to 11)
1. Press and hold ADJ button 4 for 1 second or
longer to switch to the adjustment selection
display.
2. Press the right or left side of SEARCH button
% to select "CONTRAST".
3. Press ENT button 2.
4. Turn the Rotar y knob & clockwise or
counterclockwise to adjust the contrast.
5. Pressing ENT button 2 returns to the
adjustment selection display.
6. Press ADJ button 4 to return to the previous mode.
Message display
When the unit is powered on or off, a message is
displayed. The user can turn this message
display on or off.
The factory default setting is "ON".
1. Press and hold ADJ button 4 for 1 second or
longer to switch to the adjustment selection
display.
2. Press the right or left side of SEARCH button
% to select "MESSAGE".
3. Press ENT button 2.
4. Turn the Rotary knob & clockwise to set the
message display to "ON"; turn it counterclockwise
to set the message display to "OFF".
5. Pressing ENT button 2 returns to the
adjustment selection display.
6. Press ADJ button 4 to return to the previous mode.
Triggered audio mute for cellular
telephones
This unit requires special wiring to mute the audio
signal automatically when a cellular telephone
rings in the car.
This function is not compatible with all cellular
telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.