Table of Contents
Advertisement
Adjustment in the "Management" submenu
To adjust Management settings you should follow the steps below:
1. Bring-up the OSD "Main Menu".
2. Use 'Select' button to move forward to Management icon and highlight it. This will
bring-up the "Management" submenu. There are seven items for your choice in this
submenu: Exit, Mode Info, OSD Display, Scale/Center, Language, Source and Recall
Factory Setting.
3. Use 'Right' and 'Left' keys to choose the item you need and then press 'Select' to
highlight and select it.
If 'Exit' is selected, it will exit and close the OSD.
If 'Mode info' is selected, it will show-up "Mode Info" submenu with resolution, H. and
V. frequency information displayed in it.
If 'OSD Display' is selected, it will bring-up "OSD Display" submenu. Use 'Right' and
'Left' buttons to highlight and 'Select' key to select H. or V. Position. This will show-up
the corresponding bar on menu, and you can adjust its setting by 'Right' and 'Left'
buttons. 'Right' button will move the OSD menu to the right or upward, and 'Left'
button will move the OSD menu to the left or downward.
If 'Scale/Center' is selected, it will bring-up "Scale/Center" submenu. Use 'Right' and
'Left' buttons to highlight and activate Center, Maintain Aspect Ratio, or Full Screen.
In general, full screen is preferred for using.
Note: As you choose an item, your screen immediately updates to reflect this
setting.
If 'Language' is selected, it will bring-up "Language" submenu. Use 'Right' and 'Left'
buttons to highlight and 'Select' key to activate the language you preferred and exit
this submanu.
If 'Source' is selected, it will bring-up "Source" submenu. Use 'Right' and 'Left'
26
Management
Exit
Mode Info
OSD Display
Scale/Center
Language
Source
Recall Factory Setting
Advertisement
Table of Contents
