Input Menu; Rogressive; Ideo Nr , C - Hitachi CPX9 User Manual

INPUT menu

INPUT menu
From the INPUT menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
PROGRESSIVE
VIDEO NR
COLOR SPACE
(continued on next page)
34
Using the ▲/▼ buttons switches the progress mode.
TV FILM OFF
• This function works only for a video signal, s-video signal,
component video signal (of 480i@60 or 576i@50) and an HDMI
signal (of 480i@60 or 576i@50).
• When TV or FILM is selected, the screen image will be sharp.
FILM adapts to the 2-3 Pull-Down conversion system. But these
may cause a certain defect (for example, jagged line) of the picture
for a quick moving object. In such a case, please select OFF, even
though the screen image may lose sharpness.
Using the ▲/▼ buttons switches the noise reduction mode.
HIGH MID
• This function works only for a video signal, s-video signal,
component video signal (of 480i@60 or 576i@50) and an HDMI
signal (of 480i@60 or 576i@50).
Using the ▲/▼ buttons switches the mode for color space.
AUTO RGB
• This item can be selected only for a computer signal or a
component video signal.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In such a
case, it might be good to select a suitable mode except AUTO.
Description
LOW
SMPTE240 REC709 REC601