Table of Contents
Advertisement
1. Understanding the labels
Starting up your washer-dryer
Run the first wash without laundry using programme
2 at 90°C.
Load your laundry in the washer-dryer, add the detergent
and fabric softener (see pages 3) and remember to:
- shut the door properly
- plug the washer-dryer in at the mains
- turn on the water supply
- the knob B is on STOP
- check that button F is not pressed in (position O)
Selecting the programme
The table on pages 6 will help you choose the right programme.
Turn dial A to the programme number you have chosen and,
if necessary, press function button (D, E); set ON/OFF button F
to position I (ON).
At the end of the wash cycle...
To turn off the washer-dryer press the ON-OFF button F and
wait approximately 3 minutes before opening the door. Once
you have removed your clean laundry from the washer-dryer,
remember to leave the door open or at least ajar (this will
GB
c
l
A
P
F
prevent the formation of an unpleasant odour) and shut off
the water supply.
Drying only
The glass part of the door becomes hot during the drying cycle and
reaches very high temperatures. Avoid touching the glass or coming
into contact with it.
Maximum drying loads
heavy fabrics maximum 2.5 Kg
mixed fabrics maximum 2 Kg
synthetics maximum 1.5 Kg
Load the laundry you wish to dry (max. 2.5 Kg) and check:
- that the door is firmly shut
- the plug is in the socket
- the water tap is open
- the button F is not pressed (position O)
4
Advertisement
Table of Contents
