Image Menu - Hitachi CP-RX82 User Manual

IMAGE menu

From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item
ASPECT
OVER SCAN
V POSITION
H POSITION
(continued on next page)
Using the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal
NORMAL 4:3
For a video signal, s-video signal or component video signal
4:3 16:9 14:9
For no signal
4:3 (xed)
• The NORMAL mode keeps the original aspect ratio of the signal.
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnies picture)
• This item can be selected only for a video, s-video and component
video signal.
Using the ◄/► buttons adjusts the vertical position.
Down Up
• Over-adjusting the vertical position may cause noise to appear on
the screen. If this occurs, please reset the vertical position to the
default setting. Pressing the RESET button when the V POSITION
is selected will reset the V POSITION to the default setting.
• When this function is performed
signal, the range of this adjustment depends on OVER SCAN
above) setting. It is not possible to adjust when OVER SCAN is
(
set to 10.
Using the ◄/► buttons adjusts the horizontal position.
Right Left
• Over-adjusting the horizontal position may cause noise to appear on
the screen. If this occurs, please reset the horizontal position to the
default setting. Pressing the RESET button when the H POSITION is
selected will reset the H POSITION to the default setting.
• When this function is performed
signal, the range of this adjustment depends on OVER SCAN
above) setting. It is not possible to adjust when OVER SCAN is
(
set to 10.
Description
16:9 16:10
Large (It reduces picture)
on a video signal or an s-video
on a video signal or an s-video
IMAGE menu
29