Table of Contents
Advertisement
Up to five separate timer events can be set and each
is displayed in the Timer screen, showing the event
number, the channel to be selected, the start time, end
time, date and the mode - whether that event is active
(and will be acted on) or not.
TIMER MENU
No Channel Name
Start
1.
ITV 1
20:00 21:00 12/05/2005
2.
BBC ONE
00:00 00:00 01/01/2005
3.
BBC ONE
00:00 00:00 01/01/2005
4.
BBC ONE
00:00 00:00 01/01/2005
5.
BBC ONE
00:00 00:00 01/01/2005
6.
BBC ONE
00:00 00:00 01/01/2005
Toggle Mode
Exit
MENU
• To set an event, highlight its mode button using the
/
button and press the OK button to display
the timer entry window.
Name:
Start:
End:
Date:
Mode:
• Here the five settings of channel name, start time,
end time, date and frequency mode can be set. You
can move freely between each setting using the
/
buttons.
• The channel name is set using the
display the channel which broadcasts the
programme.
• The start time, end time and date are each set with
the digit buttons on the remote control in 24-hour
format.
• The frequency mode determines how often the
receiver operates this event and is set with the
button to be either Once, Daily, or Weekly.
If an invalid number for the start or end times or the
date is entered, "Entered time is not valid" message
appears on the menu.
If timer action occurs while the TV is watched, the TV
switches to the selected channel. When timer ex-
pires, the TV switches to the channel which it is
switched from.
Selected digital channel will be output via Scart-2.
You should connect your VCR to Scart-2 for record-
ing digital broadcast.
End
Date
Mode
Active
Inactive
Inactive
Inactive
Inactive
Inactive
Edit Timer
SELECT
3. ITV 1
00:00
00:00
03/06/2005
Once
/
Recording From IDTV
Connect your VCR to
Set the
AV-2 OUT
illustrated and described on page 30.
Set the time as described above.
Set your TV to standby using the remote control.
Set your VCR to correspond with the time set on your
TV and select external input (refer to your VCR in-
struction book).
NB. If you switch on your TV whilst the timer record-
ing is active and then switch back to standby, the
timer recording will be cancelled; the timer setting will
be deleted and the desired programme will not be
recorded.
Language
i
More
Some programmes are broadcast in two or more lan-
guages simultaneously. The language heard can be
selected from the Language Menu.
• Press the
use
/
press the OK button.
button to
/
• Use the
language required and press the OK button. Normal
viewing, with the required language soundtrack, can
be resumed by pressing the
- 19 -
AV-2
via a scart lead.
in the feature menu to DDT, as
button to display the Main Menu and
button to highlight the Language line and
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
/
button to highlight the soundtrack
Languages
English
button.
Advertisement
Table of Contents
