Advanced Operations; Counter Memory; Otr (One Touch Recording); Auto Repeat Playback - Hitachi VTMX210EUK User Manual

ADVANCED OPERATIONS

Counter Memory

This feature can be used to memorize a beginning point that
you want to watch again. Rewinding or fast forwarding
makes it easy to locate this point.
NOTES:
• If a tape includes programmes recorded in PAL and NTSC,
the Counter Memory function may not operate correctly.
• COUNTER MEMORY does not function if the Auto Repeat
mode is set to ON. In this case, set the Auto Repeat mode
to OFF.
1
Stop the tape at the desired point.
2
Press COUNTER RESET to display 0:00:00.
3
Press COUNTER MEMORY so that "M" appears on the
TV screen.
4
Press REC or PLAY.
• Press STOP when recording or playback is completed.
5
Press REW or F.FWD. The VCR will automatically stop
when the counter returns to 0:00:00 (approx.)
TO EXIT THE COUNTER MEMORY
Press COUNTER MEMORY so that the "M" disappears from
the TV screen.
NOTE: When you set the Auto Repeat mode to ON while
the Counter Memory mode is ON, the VCR exits the
Counter Memory mode automatically.

OTR (One Touch Recording)

This function enables you to set the duration of a recording
simply by pressing REC on the VCR.
1 1 3
Follow steps to
same Programme" section.
2
Press REC on the VCR repeatedly until the desired
recording length appears.
0:00 0:30 1:00....
REC (Normal recording)
• Recording stops when 0:00 is reached.
• To check time remaining during an OTR
Press DISPLAY.
• To change the recording length during an OTR
Press REC until the desired length appears.
• To stop an OTR before recording is finished
Press STOP.
• To cancel the OTR but continue recording
Press REC repeatedly until "REC" appears in the upper left
corner of the TV screen.
in "Viewing and Recording the
7:30 8:00

Auto Repeat Playback

The VCR has an auto repeat function that allows you to
repeat a tape indefinitely without touching PLAY/o o
• Use the remote control for this procedure.
• Insert a pre-recorded tape.
1
Press MENU.
2
Press PLAY/o o or STOP/ L L to select "SET UP", then press
F.FWD/B.
3
Press PLAY/o o or STOP/ L L to select "AUTO REPEAT".
4
Press F.FWD/B so that "ON" appears next to "AUTO
REPEAT" on the TV screen.
When in Stop mode, Auto Repeat mode will start auto-
matically.
If the on-screen menu still remains, press MENU to exit.
NOTES:
• Once you select the Auto Repeat mode, it stays in effect
even after you turn off VCR.
• COUNTER MEMORY does not function if the Auto Repeat
mode is set to ON. In this case, set the Auto Repeat mode
to OFF.
• When you set the Auto Repeat mode to ON while the
Counter Memory mode is ON, the VCR exit the Counter
Memory mode automatically.
TO STOP PLAYBACK
Press STOP/ L L .
TO EXIT THE AUTO REPEAT MODE
1
Repeat steps to
"ON" will then disappear from the menu. Press MENU to
exit.
MENU
TIMER
SET UP
INITIAL
11
3
.Then, press F.FWD/B.
MENU
TIMER
SET UP
INITIAL
SET UP
AUTO RETURN [AUTO]
AUTO REPEAT [ ON ]
PICTURE [ NORMAL ]
EN