Table of Contents
Advertisement
cursor action, programme selection is done
automatically.
Name
To change the name of a programme, select the
programme and press the RED button.
The rst letter of the selected name will be
highlighted. Press " " or " " button to change
that letter and " " or " " button to select the
other letters. By pressing the RED button, you
can store the name.
Move
Select the programme which you want to move
by navigation buttons. Press the GREEN
button. By navigation buttons move the selected
programme to the decided programme space
and press the GREEN button again.
Delete
To delete a programme, press the YELLOW
button. Pressing the YELLOW button again
erases the selected programme from the
programme list, and the following programmes
shift one line up.
APS (Auto Programming System)
When you press the BLUE button for starting
automatic tuning, Auto Programming System
menu will appear on the screen:
Country
Press " " or " " button to select your country.
If you want to exit from A.P.S. function, press
the BLUE button.
When you press OK or RED button for starting
automatic tuning, all stored programmes will
be erased and the TV will search for available
channels. During the search, the following OSD
will be displayed:
Whenever you press the BLUE button, APS
function stops and Program Table appears on
the screen.
If you wait until the end of APS, Program Table
will be displayed with the programmes found
and located.
Source Menu
Press " " or " " button and select the sixth icon.
Then press " " or OK button. Source menu
appears on the screen:
In source menu, highlight a source by pressing
" " or " " button and switch to that mode by
pressing " " button. Source options are; TV ,
DTV , EXT-1 , FAV , HDMI, YPbPr and PC-
VGA .
Note : Once you have connected optional equipment
systems to your TV, you should select the required
input to view pictures from that source.
English - 36 -
Advertisement
Table of Contents
