Display Brightness And Resolution - eMachines Notebooks User Manual

display brightness and resolution

Q My display is blank. What's wrong?
A It could be several things:
Your notebook may be "Sleeping."
Press any key to "wake" the notebook from Sleep mode.
The brightness setting may be down too low.
Press Fn + F8 several times to increase the brightness of the display.
Your notebook may be sending its display to an external monitor or TV.
Press Fn + F4 several times to toggle through the attached display, an
external monitor or TV, or both.
Your notebook may be "Hibernating."
Press the Power button once to resume from Hibernate mode.
The lid switch may be stuck.
Press the lid switch button (located on the keyboard above the function
keys near the base of the display) several times to release it.
Q Characters are garbled or the display flashes when the notebook is
connected to an external TV. What's wrong?
A The external monitor's resolution is set too high for your notebook.
See "enabling TV
external monitor or TV.
output" in chapter 3 for more information about using an
69
troubleshooting