Setting Up The Optional Stand; Attaching The Usb Stand - eMachines E17T4W User Manual

www.emachines.com

Setting up the optional stand

Attaching the USB stand

Connect the blue right-angle VGA video cable to the blue video connector
4
under the back of the display.
Make sure that your computer is turned off, then connect the other end
5
of the video cable to the matching video port on the back of your
computer.
Plug the power cord into a correctly grounded electrical outlet.
6
In the United States, you can buy an adjustable USB stand from Gateway at
www.gateway.com. The stand can be adjusted for height, tilt, and screen
rotation. When connected to your computer's USB port, you can connect up to
four USB devices to the USB 2.0 ports on the stand.
To attach the adjustable stand:
Make sure that the monitor is turned off.
1
Place the monitor face-down on a soft, non-marring surface. A non-slip
2
mat on a tabletop is ideal. Let the monitor base hang down over the edge
of the table.
Setting up the optional stand
3