Philips CL-4 Specification

Page 1 of 2
Position A
2-1/2"
(6.4cm)
Position B
3-7/8"
(9.8cm)
Ordering Information
Style Lamps Lower Optics
CL08
F02 = 2-Lamp T5 E = Solid Housing
H02 = 2-Lamp T5HO
Features
Housing:
Die-formed 20 gauge cold-rolled steel painted white.
Weight :: 3.0 lb/ft.
Optical System: Constructed of highly specular Miro IV
reflective white 20 gauge steel to produce an asymmetric distribution.
Lamping: Two T5 or T5HO fluorescent lamp in cross section. 14 or 24 watt 2 foot,
28 or 54 watt 4 and 8 foot, 21 or 39 watt 3 and 6 foot lengths.
Mounting: Fixtures can be screwed down in multiple positions and orientations
to enable precise coordination of optical distributions.
Additional Information
Modules Lengths
Module Nominal Length
2ft 1'11"
3ft 2'11"
4ft 3'11"
6ft 5'9"
8ft 7'9"
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2010 Philips Group •
22°
Upper Optics Length
E N
N = None 02 = 2 ft.
03 = 3 ft.
04 = 4 ft.
06 = 6 ft.
08 = 8 ft.
aluminum and highly
®
Peak Candela Angles
Mounting Peak
Position A 110˚
Position B 88˚
C1210
6" (15.2cm)
6-5/16" (16.0cm)
Wirirng Voltage
1 = 1 circuit D = Dual
2 = 2 circuits
3 = 1 circuit w/
3 = 347v
Emergency circuit
4 = 2 circuits w/
Emergency circuit
5 = 1 circuit w/ Battery Pack
6 = 2 circuits w/ Battery Pack
7 = 1 circuit Dimming
Electrical
Factory pre-wired to section ends with quick-wire connectors.
Maximum ballast size is 1.3" (3.3cm) by 1.7" (4.3cm).
Standard dimming ballast is Advance Mark VII.
Labels
Certified to UL & CSA standards. Damp location.
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lighting Systems
Covelite 2-Lamp T5 or T5HO
Half Scale
Ballast Color & Finish
E W
E = Standard W = High
Ballast Reflective
120v/277v
White
Type:
CL-4