BenQ RL2455HM User Manual page 46

Item
Auto Power
Off
DDC/CI
HDMI Auto
Switch
Resolution
Notice
Information
Reset All
46 Navigating the main menu
Sets the time to power off the monitor automatically in
power saving mode.
Allows the monitor settings to be set through the software
on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards Association
(VESA). DDC/CI capability allows monitor controls to be sent via
the software for remote diagnostics.
When this function is activated, HDMI port will be in the
input auto select loop. Otherwise, HDMI can only be
selected by input select or by hot key.
Sets whether to display the resolution notice of the
recommended resolution when a new input source is
detected by the monitor.
Displays the current monitor property settings.
Resets all mode, color and geometry settings to the
factory default values.
Function Range
•
OFF
•
10min.
•
20min.
•
30min.
•
ON
•
OFF
•
ON
•
OFF
•
ON
•
OFF
•
Input
•
Current
Resolution
•
Optimum
Resolution
(best with the
monitor)
•
Model Name
•
YES
•
NO