Pptp - D-Link DIR-836L Manual

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
My Internet Select PPTP (Username/Password) from the drop-down menu.
Connection:
Enable
Advanced Domain Name System (DNS) services enhances your Internet
Advanced DNS performance by getting you the information and web pages you
Service:
are looking for faster and more reliably. In addition, it improves your
overall Internet experience by correcting many common typo mistakes
automatically, taking you where you intended to go and saving you
valuable time.
Disclaimer: D-Link makes no warranty as to the availability, reliability,
functionality and operation of the Advanced DNS service or its features.
Enable True Check to enable true Gigabit routing. This will increase the throughput
Gigabit Routing
of the WAN-LAN connectivity of the router.
Connectivity:
Address Mode:
Select Static if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic.
PPTP IP Address:
Enter the IP address (Static PPTP only).
PPTP Subnet
Enter the Primary and Secondary DNS Server Addresses (Static PPTP
Mask:
only).
PPTP Gateway:
Enter the Gateway IP Address provided by your ISP.
PPTP Server IP:
Enter the Server IP provided by your ISP (optional).
D-Link DIR-836L User Manual
Internet Setup

PPTP

33