Pioneer Super Tuner IIID DEH-P4100 Operation Manual page 64

C~I "_s_t_al_la_t_io_"
)
2. Insert the supplied extraction keys
into both sides of the unit until
they click into place.
3. Pull the unit out of the dashboard.
01 N Rear-mount
1. Extend top and bottom of the trim
ring outwards to remove the trim
ring. When reattaching the trim ring,
push the trim ring onto the unit until
it clicks. (If the trim ring is attached
upside down, the trim ring will not
fit properly.)
• It becomes easy to remove the trim ring if the
front panel is released.
2. Determine the appropriate position
where the holes on the bracket and
the side of the unit match.
C~ E"----",g~li_s_h )
3. Tighten two screws on each side.
• Use either truss screws (5 mm x 8 mm)
or flush surface screws (5 mm x 9 mm),
depending on the shape of screw holes in the
bracket.
Screw
Factory radio mounting bracket
Fastening the front panel
If you do not plan to detach the front panel,
the front panel can be fastened with supplied
screw.
Screw