MDS-JE470
3-6. MECHANISM DECK SECTION (MDM-7A)
2 Two step screws
(+BVTTWH M3)
3-7. OVER LIGHT HEAD (HR901), BD BOARD
Note 1: If you disconnect the connector (CN104), you can remove the
BD board without removing the over write head (HR901).
Note 2: Be careful to handle the over write head (HR901) because it is
easy to be damaged.
4 Remove the solder (four portion)
4 Remove the solder (five portion)
16
3 Mechanism deck
3 Head, over light (HP901)
5 Two screws (BTP2X6)
2 Two step screws
(+BVTTWH M3)
1 Harness
2 Screw (P1.7X6)
8 BD board
6
1 Connector (CN104)
7 FLEXIBLE board (CN101)