Troubleshooting; Maintenance - Drill Master 95065 Set Up And Operating Instructions Manual

problem
Cordless Screwdriver does
not operate when Trigger
Switch is pressed.
Battery Pack does not
recharge after connecting
Charger Adapter for hours.
When finished using the Screwdriver, place in its box along with accessories and store
1.
in a clean and dry location.
2. Recharge the Battery Pack (22) once a month.
3. Properly recycle Battery when Screwdriver reaches the end of its product life.
SKU 95065

TROuBLESHOOTInG

possible Cause
Battery Pack is not charged.
1. No power to Charger
Adapter.
2. Charger Adapter defective.
3. Battery Pack defective.

MAInTEnAnCE

For technical questions, please call 1-800-444-3353
probable Solution
Recharge Battery Pack.
1. Check electrical outlet for
power.
2. Replace Charger Adapter.
3. Replace Battery Pack.
Page 9