Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19e
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Drill Master 56544
Summary of Contents for Drill Master 56544
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 56544... -
Page 3: Safety
A wrench is dangerous and must be repaired. or a key left attached to a rotating part of the power tool may result in personal injury. Item 56544 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 Carrying the power tool with your extinguisher and a smoke detector in the area. finger on the switch or energizing power tool Frequently monitor the Charger while charging. that have the switch on invites accidents. Page 4 For technical questions, please call 1-888-866-5797. Item 56544...
- Page 5 Extension cords note: Extension cords must not be used with this item’s Charger. Item 56544 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 WARNING marking concerning Risk Risk of Explosion. of Eye Injury. Wear ANSI-approved Do not puncture, short, or open battery safety goggles with side shields. and do not charge a damaged battery. Page 6 For technical questions, please call 1-888-866-5797. Item 56544...
-
Page 7: Specifications
120VAC / 60Hz / 250mA Battery Rating 4.8V / 600mAh Battery Type NiCd Speed 180 RPM Chuck Size 1/4″ Functions Work Light Switch Work Light Forward Magnetic trigger chuck reverse trigger Item 56544 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 The bit size must check the actual torque applied to the fastener match the size of the screw. with a mechanical torque wrench (not supplied). Page 8 For technical questions, please call 1-888-866-5797. Item 56544...
-
Page 9: Maintenance
2. Wear ANSI-approved safety goggles and NIOSH-approved dust mask/respirator while blowing dust out of motor using compressed air. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect and charger power supply before service. Item 56544 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Parts List And Diagram
Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 10 For technical questions, please call 1-888-866-5797. Item 56544... - Page 11 Diagram Item 56544 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the 56544 and is the answer not in the manual?
Questions and answers
What is the part number for the rechargeable battery for cordless screwdriver 56544?
The part number for the rechargeable battery for the Drill Master cordless screwdriver 56544 is not explicitly mentioned in the provided context. However, the parts list includes "Battery" as item 25, but no specific part number is given.
This answer is automatically generated