Cd/Mp3/Wma Operation - Elta 2309 Manual

AM / FM / FM-STEREO RECEPTION
- Set the "BAND" selector for AM reception to AM mode.
- Set the "BAND" selector to FM mode for MONO reception.
- Set the "BAND" selector to FM ST. mode for FM STEREO reception. The stereo indicator lights up to show
FM ST. mode.
FOR BETTER RECEPTION
FM – This appliance has a FM antenna located at the rear cabinet. This wire is completely unraveled and
extended for better reception.
AM – This appliance is equipped with a built - in directional ferrite AM antenna. Rotate the appliance to get
better reception.
CD / MP3 / WMA OPERATION
GENERAL OPERATION
PLAY / PAUSE / USB Press to start playing CD / MP3 / WMA disc.
Press again to stop playing CD / MP3 / WMA operation temporarily
Press again to resume playback.
SKIP + & Press to go to the next track or back to the previous track.
SKIP -
Press and hold while playing until you find the point of the track.
STOP Press to stop all CD / MP3 / WMA operations.
PLAYBACK
1. Set the "FUNCTION" selector to "CD / MP3 / WMA" mode.
2. Open the CD door and place a CD / MP3 / WMA disc with the label side upward in the CD compartment.
3. Close the CD door.
4. Focus search is performed if disc is inside.
For CD disc - Total number of tracks is read and appears on the display.
For MP3 disc - "MP3" appears on the display.
For WMA disc - "WMA" appears on the display.
5. Press the "PLAY / PAUSE" button to start playing CD / MP3 / WMA disc.
6. Adjust the "VOLUME" control to the desired level.
7. Press the "PLAY / PAUSE" button again when you want to stop playback temporarily.
8. Press the "STOP" button when finished.
RADIO OPERATION
14.