Panasonic CF-W4GWCZZ Service Manual page 28

3.9. USB Cable processing
Process between the pin
and the Main Board.
Main Board
3.10. Wire Rod processing of Lithium Battery
Process between the pin and the pin.
Pin
HDD FFC
Put the cable when there is no space
between the Main Board and the cable
in the Main Board.
Open space between the Drive Board and the cable.
Draw out the cable straight.
Tape
0 2mm
Process the Antenna Cable between the Lithium Battery and the Boss.
Process between the boss and the HDD.
Boss
USB Cable
Fix the substrate
with two pins.
Process the USB cable on the Drive Board.
Do not multiply the stress by the Drive Board.
Paste to round shape of the Bottom Case.
0 3mm
3-8
USB Board
USB Cable
Drive
Boss