Hitachi CMP4202E User Manual page 22

OPERATING INSTRUCTIONS (continued)
DISPLAY MENU (continued)
Display area selection diagram (RGB input)
Resolution Full display
Display FULL
640 X 480
(VGA)
800 X 600
(SVGA)
1024 X 768
(XGA)
1280 X 1024
(SXGA)
1600 X 1200
(UXGA)
Processes such as compression (thinning) and expansion are performed for the above signal display. Because of this, there is a possibility that
flicker may become noticeable on ZOOM (1 ~ 3) depending on the display contents. If this occurs, turning the FILTER ON
flicker.
TIPS
• Composite / S signal (video1 input) and component (576i, 480i, 480p) signal applicable for all size modes.
• For component (HD3: 1035i, 1080i, 720p) signals, the display mode is not selectable.
Display size selection diagram
(This function can only be used when the optional video unit has been inserted.)
When you want to
Play a 4:3 image in a 16:9 screen
faithfully.
Play a 4:3 image in a 16:9 screen with
the height and width of the middle of
the screen enlarged on equal scales
and with both sides appearing
somewhat enlarged.
The 16:9 VISTA size image in the 4:3
image is faithfully reproduced on the
16:9 screen.
The 21:9 Cinema size image in the 4:3
image is expanded vertically on the
16:9 screen.
Play a 4:3 image faithfully in a 16:9
screen in the standard vertical size and
horizontally squeezed.*
NORMAL REAL
* VGA and W-VGA
only
Set the display
Input signal
size to
4 3
PANORAMA
(4:3 signal)
(Panoramic)
MOVIE1
(Vista)
MOVIE2
(Cinema)
FULL
(Squeez)
Circular display
ZOOM1 ZOOM2
Display screen
Blanking occurs on both sides.
• The 4:3 image is called a letterbox
image.
• In some cases, some slight blanking may
remain at the top and bottom.
In some cases, some slight blanking may
remain at the top and bottom.
* An image with an aspect ratio of 16:9
shrunk horizontally to 4:3 to display in a
4:3 screen
ZOOM3
can reduce the
Remarks