Download Print this page
Lucent Technologies CIB40 Installation Manual
Lucent Technologies CIB40 Installation Manual

Lucent Technologies CIB40 Installation Manual

Memory module

Advertisement

Quick Links

Lucent Technologies
CIB 3140
(533B) Memory Module (61227A)
(106433691)
Bell Labs Innovations
CIB 3140
Comcode 106433691
Issue 2
January 1997

Advertisement

loading

Summary of Contents for Lucent Technologies CIB40

  • Page 1 Lucent Technologies Bell Labs Innovations CIB 3140 (533B) Memory Module (61227A) (106433691) CIB 3140 Comcode 106433691 Issue 2 January 1997...
  • Page 2: Memory Module

    Memory Module ® When installed in the MERLIN Plus system control unit, this memory module (Figure 1) upgrades your system to the MERLIN Plus Communi- cations System Release 2. MEMORY MODULE Figure 1 MERLIN Plus Communications System Release 2 Memory Module The new system features available with this memory module are listed below.
  • Page 3 NOTE: This memory module also houses a battery that preserves all programming for at least four days in case of a power failure. In addition, a 450F adapter is included to provide a connection between the control unit and the Data Collector, and to allow the Data Collector and the Busy Buster feature to share the same jack on the voice terminal module.
  • Page 4 Loosened screw Figure 2 Removing the Front and Top Covers From the control Unit To Insert the new memory module, first grasp its plastic handle on the front and align the four pin guides at each corner of the module with the rectangular opening at the top of the control unit (Figure 3).
  • Page 5 Memory module Figure 3 Inserting and Removing the Memory Module 8 Plug the power cord back into the outlet and set the power switch on the control unit to On. 9 Replace the front cover on the control unit. Remember, you will have to readminister and reprogram your sets as described in Section 3, "Administering the System,"...
  • Page 6: Recycled Paper

    Customer Administerable Timer The Customer Administerable Timer is used in conjunction with the Call Forwarding and Remote Line Access features. The timer disconnects calls made via Call Forwarding and/or Remote Line Access after these calls reach a system-wide call duration limit. The Customer Administerable Timer can be set to a value of from 1 to 999 minutes.
  • Page 7 Lucent Technologies Bell Labs Innovations Copyright © 1996, Lucent Technologies All Rights Reserved Printed in U.S.A.

This manual is also suitable for:

Cib3140