Table of Contents
Advertisement
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
MODE
STORE
Setting Sharpness
• Using " " or " " button select Sharpness.
• Press " " button to increase peaking level.
• Press " " button to decrease peaking level.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
MODE
STORE
Setting Hue
(During Playback NTSC system, this will appear in AV mode
only when NTSC video source is applied. Otherwise, HUE
option is invisible in Picture menu.):
• Using " " or " " button select Hue.
• Press " " button to increase hue level.
• Press " " button to decrease hue level.
Center value is indicated with the two reciprocal arrows.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
HUE
MODE
STORE
Mode
This item is used to change the picture size. By pressing " "
or " " button you may choose one of these options: "4:3",
"16:9" and "AUTO". It is also possible to change picture modes
directly by pressing button "
• 4:3 This option forces the picture ratio to 4:3 mode.
• 16:9 This option forces the picture ratio to 16:9 mode.
• AUTO This allows to change the picture mode automatically,
according to the transmission of the selected channel. For
example, your TV is 4:3 mode, but the transmission of that
channel is in 16:9 mode. If you select the AUTO mode, the TV
is switched to 16:9 mode automatically. If the TV is in 4:3
mode and the picture ratio of the channel is also 4:3, there will
be no affect selecting the picture mode to AUTO mode.
WSS feature is only used in TV and F-AV modes. For the Pic-
ture Mode selection in AV-1 and AV-2 the pin 8 (of Scart) value
is used. In RGB and SVHS modes the Picture Mode can be
4:3, 16:9 (Auto mode is not available.).
4:3
4:3
4:3
" on your remote control.
ENGLISH - 11 -
When the menu appears on screen, picture mode will auto-
matically change to its default tube mode (4:3 or 16:9) but it
will turned to its stored mode when the menu disappears.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
MODE
STORE
To Store the Settings
• Press " " or " " button on STORE option to store Picture
menu settings except Picture Mode.
The stored picture mode setting will be valid only in current
program. However, the other stored values in Picture Menu will
be valid for all the programmes.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
MODE
STORE
Feature Menu
• To enter the Feature menu directly, press the "YELLOW"
button, or
• Press "
" button, now you are in Main menu. In the Main
menu, select FEATURE using " " or " " button. Then enter the
Feature menu pressing " " or " " button.
SOUND
PICTURE
FEATURE
INSTALL.
PROGRAM.
Sleep Timer
As you enter the Feature menu, SLEEP TIMER will be the first
selected option. Use " " or " " button to change the Sleep
Timer values between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00,
1:15:00, 1:30:00, 1:45:00 and 2:00:00.
It is displayed on the upper right of the screen. If sleep timer is
activated it is displayed with the TV status and erased with it
after 3 seconds.
SLEEP TIMER
CHILD LOCK
LANGUAGE
AV-2 OUTPUT
If there is only one minute of the countdown timer left, it is dis-
played automatically on the upper right side of the screen and
stays there until finished. Then TV goes automatically to stand-
by.
4:3
4:3
OK
0:15 : 00
OFF
OFF
ENGLISH
TV
Advertisement
Table of Contents
