BD1217 ME4251 user guide [5]
Direct dialling
1. Press the
2. Dial the telephone number and complete the call.
When the call is connected, the call duration will be displayed and will remain in the
display until 3 seconds after the call is ended.
The call timer format is HH:MM:SS.
3. Press the
On-hook dialling (pre-dialling)
1. Dial the telephone number.
2. Delete any incorrect digits by pressing the SKR key.
3. Press the
4. To end the call, press the
Using the Handsfree Speakerphone
In handsfree mode, all communication is via the handset speakerphone and
microphone, leaving your 'hands free'.
You can make a call handsfree or switch to handsfree during a call.
Make a handsfree call
In standby mode:
1. Dial the telephone number and press the
2. Press the
telephone number as required.
3. Hold your conversation - speak to the caller through the microphone and listen
over the speaker.
17
4. Press the
18/7/05
1:20 pm
key and wait for the dialling tone.
key to end the call.
key. The displayed number is dialled.
key.
key and wait until the handset speaker comes on, then dial the
key to end the call.
Page 17
key. The handset speaker comes on.